top of page

Paradise Motors skyline showroom

daniellaATS
19 hours ago
4 min read

How Paradise Motors made room for OMODA JAECOO


Two doors tell the story of the new Paradise Motors dealership in Adelaide. At the front, a pair of glass doors opens wide enough to bring cars straight onto the showroom floor. At the rear, an automatic roller door gives the workshop its own vehicle access. Between them is a 20-metre-long modular building that changes width halfway along to make room for both jobs.


Service Area of the new Paradise Motors Skyline Structure
Service Area of the new Paradise Motors Skyline Structure

A new brand needed a place of its own


Paradise Motors was growing and had bought a site across the road for its OMODA JAECOO dealership. The team needed somewhere to display the range, meet with customers and run a workshop. They heard about Australian Temporary Structures through word of mouth and called us to see what we could build.

 

The brief was about more than finding space for a few extra cars. The dealership needed to work on a busy day, when the sales team might be changing the showroom display while the workshop was moving vehicles in and out. Those two activities shaped the layout and gave each end of the building its own point of access.



Entrance view of the Paradise Motors Skyline Structure
Entrance view of the Paradise Motors Skyline Structure

Why the showroom is wider than the workshop


The front section measures 15 m × 10 m, giving Paradise Motors 150 m² for vehicle displays and sales offices. Tall, dark-framed glazing wraps around the showroom corner, putting the cars in view from outside and bringing daylight onto the tiled display floor. Recessed downlights sit within the suspended ceiling grid above the vehicles.

 

Behind the sales area, the building steps in by five metres. The 10 m × 10 m workshop has its own automatic roller door, so workshop vehicles can come and go independently of the showroom. Each section is 10 m deep, with the change in width occurring at the midpoint of the building. Together, the two sections give the dealership a nominal footprint of 250 m², with the extra width concentrated where customers see and walk around the cars.


New cars ready for pick up
New cars ready for pick up

A permanent home for the new dealership


We built the Skyline structure, manufactured by HR Structures GmbH, as a permanent installation on a concrete slab. The building has a 5 m side height, and a sandwich-panel roof covers both the wider showroom and the narrower workshop. The Skyline walling system combines glass and sandwich panels, with the shift from the glazed showroom to the panel-clad workshop visible from the side.

 

The Attica façade wraps around the full perimeter, following the change in width where the building steps in. At the front, the blue fascia carries the OMODA JAECOO lettering above the glass, with the branding continuing around the corner.


Customer Service area
Customer Service area

From council approval to the signs going up


What stood out to Ben Neale, General Manager of Paradise Mazda, was how quickly the structure went up once council approval came through. When he first updated us during the fit-out, tiling and painting were scheduled for the following week and signage was about to start. By his next update, the OMODA JAECOO signs were up.

 

Inside the finished dealership, JAECOO vehicles are on display beside the sales area. A clearly marked service desk sits next to a customer lounge, giving customers a place to check in and wait while the workshop handles vehicle movements through its own entrance.



“We are very happy with the result.”

Ben Neale, General Manager, Paradise Mazda

The project was already attracting attention during the fit-out. When OMODA JAECOO’s Australian office asked who to contact at ATS, Ben passed on our details. A project that started with a word-of-mouth referral had led to another introduction.



Paradise Motors showroom
Paradise Motors showroom

How ATS takes a dealership from concept to completion


We start with your site plan, franchise requirements and how your team needs to use the building.


  • How many vehicles will you display?

  • Where will customers meet with sales staff or check in for a service?

  • How will cars get onto the showroom floor and into the workshop?


At Paradise Motors, those decisions led to a 15-metre-wide showroom at the front and a 10-metre-wide workshop at the rear, each with its own vehicle access.

 

Once the layout is agreed, we work through the building details, from the slab interface and door openings to the glazing, wall panels and space for franchise signage. We also establish where the structure and the fit-out meet, so items such as ceilings, lighting and floor finishes can be planned together.

 

With the required approvals in place and the site ready, ATS installs the structure. At Paradise Motors, Ben’s fit-out updates showed what came next as tiling, painting and signage turned the building into a branded dealership. The finished showroom brought the original brief together in one place, with vehicles on display, sales offices, a service desk and customer lounge, and a workshop with its own entrance.


Paradise Motors showroom suspended ceiling
Paradise Motors showroom suspended ceiling

Adding a franchise or expanding your dealership?


Talk to Australian Temporary Structures about a modular car showroom configured around your site, your vehicle displays and the way your team moves cars through the building.


Bring us your site plan and franchise requirements and we can work through the showroom, sales offices and workshop layout with you from the first concept.



Comments


bottom of page